mmm problem the ewlink app tells me not posible to share any suggestion?
@Netcall245 Manuel, can you see if the eWeLink app will let you share your sensor with support@thehomeremote.com?
Hey i did already sharing 2 devices with you
Thanks. I see it now. I’ll test this tomorrow.
Is your internet down? The sensor appears to be offline currently.
Yes sorry i was doing some wirk on the electric it shoukd be fine now
Thanks. Yes, it’s online now.
However it is indeed reporting back a bit of an unexpected value. It’s currently reading 3.103. I don’t really know what this means. I see in the eWeLink app it has a full charge. Not sure I understand the scaling they are using.
{
"switch": "off",
"battery": 3.103,
"fwVersion": "1000.2.924",
"type": 4,
"chipID": "d02701c1c652",
"mac": "d02701c1c652",
"rssi": -85,
"lastUpdateTime": "2021-03-12T23:15:49.955Z",
"actionTime": "2021-03-12T03:28:53.51Z"
}
So apparently that’s the voltage. Your battery is currently measuring 3.103 Volts. I suppose I could divide that number by 3 to create a percentage. Guessing they all use a standard CR2032 3V battery.
Yes i see that, you know is using 2 AAA batteries totalling 3 volts
Also can you do anything on th16 unit the temperature one as i mention before is reading on celsius then on settings on device i select the desired format or can have option to convert the reading into farenheit?
I can also share one
Regards
I own a TH16. I can look into it.
Ok thanks let me know if anything else i can help
Hey just a heads up i have 2 different august account because of different addresses one is good and other one is not updating the status or let me do anything can you please check what is wrong i can give you the credentials number is 5612295463
Okay found the problem - its the server of EWLINK you can only share Accounts on the same Server so i cant share a account that not basend on the european server array - 
but i see Netcall245 has done meantime - thanks !
Hello bill this devices are not showing status now they were before dont know what happened i just noticed not showing now i check on ewelink server from app and it is good also i have a few zigbee sonoff temp sensor but same as th16 only display temp on celsies any workaround to display farenhait
I see the issue. For some reason the raw JSON coming back from your device says it’s offline
"online": false
There was a change in the last release made so that the app won’t bother reading state data for devices that are offline. I don’t know why your DW2 sensor is reporting that it is offline. Can you try opening & closing the door & see if the official eWeLink detects the correct open/closed states?
I did and it remains same but on the ewelink app everything is working, is shows all also i know i ask before about the temp conversion any update?
You can’t currently do temperature conversions for the TH16.
What about fir the sonoff zigbee temp sensor it only reads on celsius
Status should be working again for the DW2 in version 4.2.1
Thank you thank you Bill you the best