Fibaro Smart Implant on HC3

#1

hi I’m using a Smart Implant to Control Gates, with the inputs/outputs disconnected.
using the inputs as gate status Binary Input NC
and the outputs as switches open/ hold gate
On the Home remote, The switches work ok but i cant find the inputs in the device section under fibaro.

Can this be added manually

#2

I’m not sure. I’d have to see the actual JSON for these input devices. Open the URL below & then attach the JSON so I can look at it. Update the HC3_IPADDRESS & FIBARO_DEVICE_ID fields to match your actual values.

http://HC3_IPADDRESS/api/devices/FIBARO_DEVICE_ID

#3

hi bill is this what you looking for
thanks

{“id”:605,“name”:“Gate is Open”,“roomID”:493,“view”:[],“type”:“com.fibaro.binarySensor”,“baseType”:“com.fibaro.sensor”,“enabled”:true,“visible”:true,“isPlugin”:false,“parentId”:519,“viewXml”:false,“configXml”:false,“interfaces”:[“fibaroBreach”,“zwave”,“zwaveAlarm”],“properties”:{“parameters”:[{“id”:24,“lastReportedValue”:0,“lastSetValue”:0,“size”:1,“value”:0},{“id”:25,“lastReportedValue”:0,“lastSetValue”:0,“size”:1,“value”:0},{“id”:40,“lastReportedValue”:0,“lastSetValue”:0,“size”:1,“value”:0},{“id”:41,“lastReportedValue”:0,“lastSetValue”:0,“size”:1,“value”:0},{“id”:47,“lastReportedValue”:255,“lastSetValue”:255,“size”:2,“value”:255},{“id”:49,“lastReportedValue”:0,“lastSetValue”:0,“size”:2,“value”:0},{“id”:52,“lastReportedValue”:255,“lastSetValue”:255,“size”:2,“value”:255},{“id”:54,“lastReportedValue”:0,“lastSetValue”:0,“size”:2,“value”:0},{“id”:63,“lastReportedValue”:5,“lastSetValue”:5,“size”:1,“value”:5},{“id”:64,“lastReportedValue”:0,“lastSetValue”:0,“size”:2,“value”:0},{“id”:65,“lastReportedValue”:5,“lastSetValue”:5,“size”:2,“value”:5},{“id”:66,“lastReportedValue”:0,“lastSetValue”:0,“size”:2,“value”:0},{“id”:67,“lastReportedValue”:5,“lastSetValue”:5,“size”:2,“value”:5},{“id”:68,“lastReportedValue”:0,“lastSetValue”:0,“size”:2,“value”:0},{“id”:150,“lastReportedValue”:10,“lastSetValue”:10,“size”:1,“value”:10},{“id”:151,“lastReportedValue”:10,“lastSetValue”:10,“size”:1,“value”:10},{“id”:152,“lastReportedValue”:0,“lastSetValue”:0,“size”:2,“value”:0},{“id”:153,“lastReportedValue”:0,“lastSetValue”:0,“size”:2,“value”:0},{“id”:154,“lastReportedValue”:0,“lastSetValue”:0,“size”:1,“value”:0},{“id”:155,“lastReportedValue”:0,“lastSetValue”:0,“size”:1,“value”:0},{“id”:156,“lastReportedValue”:10,“lastSetValue”:10,“size”:2,“value”:10},{“id”:157,“lastReportedValue”:0,“lastSetValue”:0,“size”:2,“value”:0}],“pollingTimeSec”:0,“zwaveCompany”:“Fibargroup”,“zwaveInfo”:“3,6,2”,“zwaveVersion”:“5.1”,“alarmLevel”:0,“alarmType”:0,“categories”:[“gates”,“security”,“other”],“configured”:true,“dead”:false,“deadReason”:"",“deviceControlType”:0,“deviceIcon”:21,“endPointId”:2,“lastBreached”:1611338841,“log”:"",“logTemp”:"",“manufacturer”:"",“markAsDead”:true,“model”:"",“nodeId”:62,“parametersTemplate”:“825”,“productInfo”:“1,15,5,2,16,0,5,1”,“saveLogs”:true,“serialNumber”:"",“useTemplate”:true,“userDescription”:"",“value”:false},“actions”:{“reconfigure”:0},“created”:1611250335,“modified”:1611250335,“sortOrder”:3}

#4

Yes. This is what I was looking for. This device will be supported in the next 3.18.0 release.

#5

For this device, what does Fibaro show as the value? The JSON has a boolean of true/false but I’m guessing their UI probably shows on/off or open/closed. Which is it?

#6

Hi Bill, Not sure, if i use it for a scene the only option i have is the State and that’s safe of detected same as a PIR

thanks for your help Bill

#7

bill sorry on the UI its shows as Not Breached/Breached

#8

Thanks. I also did some digging in their forum. Based on what I read, I can’t really assume that true means Open & false means Closed. It’ll really depend on whether the device has been configured to be normally open or normally closed. For this, I’m creating a new Home Remote Capability called BinarySensor that can be used by Fibaro, Vera, & the upcoming Home Assistant integration. I think I’m going to choose the terminology that HA uses & go with On / Off. So On will be “Breached” & Off will be “Not Breached”.

#9

The 3.18.0 update is live. You should be able to access these sensors now.

Not all Fibaro HC3 devices are visible
#10

hi bill good stuff works well thanks